Falcon Radio Equipment

Radio Equipment

Lithium Polymer 60mAh Single Cell 1.6g Single cell 1.6g 20C discharge rate Dimensions 12mm x18mm x 6mm Price: £4.75
Quantity:

Falcon Femto 0.8g Digital Servo Without connectors the servo weighs 0.8g; with IDC connector 0.92g and JST/Spektrum connector 0.97g. Torque is 2g/cm. Designed to work on 1 Lipo cell (3-4.2 volts) Dimensions: Length 10 mm Width over mounting lugs 11mm Width across output arm 9.8mm Overall height 14mm Complete with instructions and 2 servo mounting screws. See connector choice below Price: £18.95
Quantity: Connector

Falcon Breeze Block now with DSP & Fail Safe Falcon Breeze Block Mk III with DSP & Fail Safe 4.8g 35MHz & 72MHz FM RX with 2 Falcon Mk III servos. Complete with CNC cut ply mount. Price: £49.95
Quantity: 35MHz or 72MHz select below

Breeze Mount Falcon Breeze block mount Made from CNC cut 0.8 ply and supplied with 3 x12BA screws for easy mounting of the breeze into your model. Price: £0.90
Quantity:

Falcon Mk IV 1.6g Servo The Ubiquitous Falcon 1.6g Servo has now been further improved and is compatible with all radios including the new Spektrum 2.4GHz radio. It has unique electronic stops and it will not arm until it receives a constant input signal. Innovative design developed and manufactured in the UK. Fast and powerful - check out the Lil Bit Special 3D models. Servo supplied with IDC fly lead - see below for alternate lead Price: £14.95
Quantity:

Falcon Servo to Spektrum Rx Lead The new Falcon servo has a plug in lead to allow the use of either Falcon IDC or JST connectors for use with the Spektrum 6300 2g Rx or any Receiver with JST negtive centre pin. If positive centre pin is required the wires can be easily swapped by lifting the plastic tag to remove and reposition crimps. Price: £1.95
Quantity:

Servo and Breeze Mounting screws Servo and Breeze block mounting screws 10 in a packet 1.5mm Dia, 3mm long. low profile, flat cross head Price: £1.95
Quantity:

Falcon Receiver with DSP & Fail Safe Falcon Receiver Mk III with DSP & Fail Safe 35 MHz & 72 MHz IDC Price: £15.95
Quantity: 35MHz or 72MHz choose below

Send your Falcon Rx or Breeze for upgrade to DSP and Fail Safe The Digital Signal Processing function ensures only clean signals reach the servos. If after approx. 1-2 seconds no good signals are received, the fail safe function will be activated. The Fail Safe function remembers the Tx stick positions on power up eg, throttle closed, controls neutral. Tx on first then switch on Rx. To test fail safe, throttle up , control sticks full travel, swtich off Tx, neutral controls, motor cuts. Order online and send your Rx or Breeze to Falcon Models, 22 Dartmouth Park Avenue, London NW5 1JN, UK. Price: £8.95		Quantity:

Paypal If you wish to pay by Paypal please contact Falcon Models by email or phone for the account details.


Shipping Charges Padded Envelope bags within the UK £2.95 Kits within the UK £4.95 Padded Envelope to Europe £4.00 Kits to Europe £7.95 Padded Envelope International (outside Europe) £6.00 Kits International £12.00 All international parcels will be sent International Signed For. For larger than specified above consignments it will be necessary to charge according to size and weight. Please contact us for confirmation of shipping charges prior to despatch.


GWS Crystals 35MHz only. For 72MHz contact your local supplier 35MHz, Channels 60 to 80 Even numbers only Price: £6.25
Quantity: Channel

IDC 2 wire power socket IDC socket for those who wish to use batteries not supplied with them. 2 in packet Price: £1.95
Quantity:

IDC 3 Wire Polarity Identifcation See attached picture for positive, negative and signal wires


IDC Extra Long 3 Wire Fly Lead 2 in pack Price: £1.95
Quantity:

IDC 2 Wire Power Lead 50mm IDC 2 wire Power Lead 28 AWG for battery or power lead 50mm 2 in pack Price: £2.45
Quantity:

IDC 2 wire double ended 100mm power lead IDC 2 wire double ended 100mm power lead One in pack Price: £2.45
Quantity:

IDC Double Ended 3 wire Fly Lead 3 wire 30 AWG IDC double ended fly lead 50mm 2 in pack Price: £1.95
Quantity:

IDC Single ended 3 wire Lead IDC 3 wire 30AWG single ended 50mm Lead 2 in pack Price: £1.95
Quantity:

IDC Y Lead For use with Falcon IDC plug system - allows for 2 servos to be connected to one Rx output Price: £3.95
Quantity:

IDC Charge Lead IDC Charge Lead for connecting battery to charger Price: £1.95
Quantity:

Shipping Charges Padded Envelope bags within the UK £2.95 Kits within the UK £4.95 Padded Envelope to Europe £4.00 Kits to Europe £7.95 Padded Envelope International (outside Europe) £6.00 Kits International £12.00 All international parcels will be sent International Signed For. For larger than specified above consignments it will be necessary to charge according to size and weight. Please contact us for confirmation of shipping charges prior to despatch.


2 Wire JST Plug or Socket Connecting System with 2-wire leads AWG28 for power supply of RC-Home-Flyers. Plug or socket with 15cm 2-wire leads AWG28 Price: £1.95
Quantity: Choice

Paypal If you wish to pay by Paypal please contact Falcon Models by email or phone for the account details.


3 Wire JST plug or socket Connecting System with 3-wire leads AWG32 For connection of servos and controllers to receivers. Plug or socket with 15cm 3-wire leads Price: £1.95
Quantity: Choice Plug Socket

Falcon Speed Con 1 HF ESC Single Li-Poly cell Falcon Speed Con 1 High Frequency ESC 100 kHz, 1.5 amps continuous. Arms in low throttle position and incorporates fail safe motor shut off if loss of signal. New IDC sockets. 17mm x 12mm x 3.8mm Price: £12.95
Quantity: Choice IDC JST

Falcon Speed Con 2 HF ESC for 2 Li-poly cells Falcon Speed Con 1& 2 High Frequency ESC Falcon Speed Con 2 High Frequency ESC for 2 Lipoly cells, 100 kHz, 1.5 amps continuous. Arms in low throttle position and incorporates fail safe motor shut off if loss of signal. New IDC sockets. Speed Con 2 incorporates 5v BEC and easily operates 4 Falcon servos. Data: 1.25g complete with connectors and wire. Dimensions: 17mmx 12mmx3.8mm Price: £14.95
Quantity: Choice IDC JST

Lithium-Polymer KOK 350 mAh single cell WHILE STOCKS LAST Lithium-Polymer KOK 350 mAh single cell 20c discharge, 40c short bursts Dimensions: 52mm x 33mm x 2.7mm 10g Price: £2.50
Quantity:

350 mAh 2 cell pack 2 cell pack of 350 mAh Li poly Price: £9.75
Quantity:

Lithium Polymer 250mAh 12.8g 2 cell 4th Generation Li Poly cells. 12c continuous discharge. 36mm x 19.5mm x 11mm 12.8g Supplied as standard with 28AWG black and red wires. Price: £13.95
Quantity:

Lithium Polymer 250mAh 6.1g single cell 4th Generation Li Poly cells. 12c continuous discharge. 35mm x 19.5mm x 5.5mm Supplied as standard with solder tags Price: £6.95
Quantity:

Lithium Polymer 130mAh 3.4g 4th Generation Li Poly cells. 10c continuous discharge. 25mm x 19.9mm x 4.7mm Supplied as standard with tags Price: £5.95
Quantity:

Lithium Polymer 140mAh 2 cell 4th Generation Li Poly cells. 10c continuous discharge. 18mm x 19.9mm x 14mm 8g Supplied as standard with tags Price: £9.95
Quantity:

Falcon Li Poly Charger Falcon Li Poly Charger with IDC lead. 8-15v input DC. Red LED indicates charging in progress. Green LED - charge complete Single Cell Charger: Charges 1 x 90mAh or 1 x 145mAh cell. Charge rate is 100mA @ 4.2v max. 2 cell Charger: Charges 2 cell, 145mAh pack. Charge rate 100mAh @ 8.4v max. Charge cells in fireproof container. Ensure correct charger for cell. Price: £12.95
Quantity: Choice 130 single cell 130 mAh 2 cell

Lo Volt Detectors Surface mounted red LED illuminates when the cell voltage reaches 3.2v for single cell: 6.4v for 2 cells and 9.6v for 3 cells. Choose detector for 1, 2 or 3 cells. Data: Mass: 0.25g Dimensions: 7.5mm x 7.5mm x 1.7mm 150mm of connecting wire Price: £6.95
Quantity:

Slide Switch Micro Slide Switch Saves plugging and unplugging the battery pack to turn the radio on and off. This high quality switch comes complete with 30mm of heat shrink tubing. Data: Mass 0.25g Dimensions: Length 10m, width 2.5mm, Height 6mm (13mm over pins) Price: £1.95
Quantity:

Flex Micro-wire AWG28 Colours: red. black, Area: 0,08 mm² Mass: 0,93 g/m Price per meter Price: £1.15
Quantity: choice

Flex Micro-wire AWG32 Colours: Red. White, Grey Area: 0,08 mm² Mass: 0,93 g/m Price per meter Price: £1.15
Quantity: Choice

AWG 32 150mm lengths Stripped Ends 150mm lengths of AWG32: 10 x black, 10 x red Price: £1.90
Quantity:

AWG 32 100mm lengths not stripped 7 of Each Red, Black and White lengths Price: £1.90
Quantity: